4-Channel Solid State Relay Module High Low Level Trigger 3A Optocoupler Isolation

LM YN 4-Channel Solid State Relay Module https://1drv.ms/b/c/4a0865b22350d05c/IQB-PEXeY3yzRYS-NYh951T1AYSQtRtdN-vCWy3pZbKZA90?e=LXyrO0 Feature: 1, DC 5-32V wide voltage power supply, with anti-reverse power supply capacity; 2, the output rated load: AC / DC 0-50V / 2A; Maximum load: AC / DC 0-60V / 3A (within 100ms); 3, the output port is normally open type of switch contacts, the contact is not charged node, the current direction without requirements; 4, the input control high and low selectable; built-in current limiting resistor, you can directly use the power of the positive or negative control, you can also use the microcontroller I / O port control; 5, the module anti-interference ability, stable performance; trigger current minimum 0.1mA; 6, with power indicator (red) and each way relay status indicator (blue) 7, the use of blue terminals; 8, module size: 6.0cm * 5.0m * 1.0cm (L * W * H) Precautions: This module can be used directly for signal or resistive load control; If you are using control for inductive loads (eg small motors, solenoid valves, etc.), keep more than 3 times the remaining amount and add freewheeling diodes at both ends of the inductive load. Module interface Module Control: 1, DC +: Connect the DC power supply positive； 2, DC -: Connect the DC power supply negative； 3, X1-X4: Relay control interface, high-level (3V) relay pull, low-levl (less than 2V) relay disconnect, trigger current only 0.1mA. Relay output: 1, NO1-NO4: relay normally open interface; 2, C0M1-COM4: relay common interface; Package Included: 1*4-Channel Solid State Relay Module If you for any reason are not happy with any product supplied , please do not hesitate to contact us and we will do our best to solve your problem .

• LM YN 4-Channel Solid State Relay Module, optional positive or negative signal trigger, only need 0.1mA trigger current, can drive the maximum control capacity of 3A solid state relay pull.
• The module uses high-quality components, red and blue signal indicator, industrial grade double-sided PCB board, stable performance.
• With solid-state relay output resistance is very small features, can replace the mechanical relay contacts, but also has a small control current, fast action time, long working life and other characteristics, can be widely used in a variety of power Or signal control cases.
• DC 5-32V wide voltage power supply, with power supply anti-reverse ability;
• Output Rated load: AC / DC 0-50V / 2A; Maximum load: AC / DC 0-60V / 3A (within 100ms);
• Module size: 60x50x10mm(LWH), hole diameter 3mm.